Veritas992 AIT Automated Interoperability Test System
Interoperability testing is critical to the success of DSL equipment adoption in service providers' DSL networks.
Interoperability testing is critical to the success of DSL equipment adoption in service providers' DSL networks. Current manual test methods are tedious and time consuming, often with inconsistent and unreliable results. Aware's Veritas992 AIT Test System performs consistent and repeatable automated interoperability physical layer loop testing to comply with existing and emerging interoperability standards such as those defined in G.dmt, DSL Forum's TR-048 (WT-062 v9) and for the North American, Asian, and European markets. The Veritas992 AIT Test System integrates the control of line simulators and noise impairment generators to automate physical layer loop testing for CPE and DSLAMs. This enables DSL equipment vendors, service providers and test labs to perform pre-testing, certification testing, and interoperability testing.
Functional DescriptionAware's Veritas992 AIT consists of the following components:
Veritas992 ECR - Baseline tester and diagnostic tool for correct setup and troubleshooting
AIT Software Pack - Available for North American loop tests or European loop tests
North American Loop tests - Automates G.dmt, TR-048 (WT-062) physical loop tests for widely deployed DSLAMs
European Loop tests - Available for either Annex A or Annex B. Automates TR-048 (WT-062) European, G.dmt, and ETSI physical loop tests
Test Manager - GUI software controls and manages tests
Data Cruncher software - Consolidates raw test data and presents results in a detailed spreadsheet format
Data Compare software: Compares multiple test data to aid in modem performance analysis
User manual
Cables and accessories
Who Should Use the Veritas992 AIT?
CPE and DSLAM vendors to pretest equipment prior to service provider interoperability testing
Test labs to deliver accurate test results with confidence
Service providers to satisfy customers with more reliable service and a multitude of CPE options.
North American AIT Software Pack1. TR-048 (WT-062 v9) North American loop tests, Sections 8.1-8.4 excluding 8.2.2
a) Loop Tests with Ports Set for Adaptive Rate
b) Loop Tests with Ports Set for Fixed Rate
c) Full Rate Standard Loop Test
d) Bridged Tap Tests
2. G.dmt (Cat. I) North American tests
3. Additional AIT tests
a) ANSI #9
b) Loop Reach - 24 AWG straight loop, 26 AWG straight loop
4. Supported Loop Simulator Configuration for North American AIT software pack
1) Spirent DLS 400
2) Spirent DLS 400IA Coming Soon
5. Supported DLS Noise Sources
a) Spirent DLS 5A00
b) Spirent DLS 5A01
Цена: USD
|
487-997-508
